Raspberry PI static IP setup - Wireless wlan0

1)Edit network card and add ip / broadcast / gateway address

pi@raspberrypi ~ $ cat /etc/network/interfaces
auto lo
iface lo inet loopback

auto eth0
allow-hotplug eth0
iface eth0 inet manual

auto wlan0
allow-hotplug wlan0
iface wlan0 inet static
address 192.168.1.33
netmask 255.255.255.0
broadcast 192.168.1.255
gateway 192.168.1.254
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

auto wlan1
allow-hotplug wlan1
iface wlan1 inet manual
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf

pi@raspberrypi ~ $

2) Add wifi router name & password

pi@raspberrypi ~ $ sudo cat  /etc/wpa_supplicant/wpa_supplicant.conf
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1

network={
        ssid="hubname"
        psk="password"
        key_mgmt=WPA-PSK
}
pi@raspberrypi ~ $

3)View your ip


pi@raspberrypi ~ $ ifconfig wlan0
wlan0     Link encap:Ethernet  HWaddr
          inet addr:192.168.1.33  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:915 errors:0 dropped:148 overruns:0 frame:0
          TX packets:329 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:202526 (197.7 KiB)  TX bytes:49840 (48.6 KiB)

pi@raspberrypi ~ $

simple google search can fetch lots of results  but this post is for my reference :) ,Today My Raspberry PI2 DAY :)